Welcome to Bespacker

+86 13388598859/+8613305778726

Whatsapp:

zhejiang Bespacker Machine Co.,Ltd

+86 13388598859/+8613305778726

WECHAT:

Ordering high quality packaging machinery products


Email:
sales@cnbespacker.com

产品详细 |

 Product Categories 
PRODUCTS DETAIL
Bespacker TDJ-160 semi automatic tinplate capping machine tin bear soda aluminum can sealing machine
    Publish time 2018-05-19 23:57    


Machine Video                                                                    

Bespacker TDJ-160 semi automatic tinplate capping machine tin bear soda aluminum can sealing machine





Model
TDJ-160
Power
370W
Bottle diameter
45-110mm
Bottle height
39-225mm
Production Capacity
25 times/min
Machine size(mm)
800*360*970mm
Weight
110kg


Product Introduction

This electric seamer compared with the traditional pedal lever can sealing machine,Can sealing efficiency was improved greatly,reduce the labor intensity of workers,and reduce the defective product caused by human factors,is the ideal equipment of food and beverage industry, a necessary.
This production is applicable to all kinds of circular iron, glass, plastic cans sealing,Quality is reliable, easy to operate and lighter, it is the ideal equipment of food and beverage industry, a necessary.


Operational key points:

1. The preparation before starting the work.
(1). Check all parts are in good lubrication.
(2). Check whether there is any loose on the firmware, the power cord with and without damage.
(3). Check the rotation system and mechanism for abnormal sound.

2.The adjust :
According to the point switch slowly adjust, lifting screw, adjust to the pot height required.Can sealing should pass the first roller and the two way roll to roll shall be complete, adjust the position of the roller wheel can sealing are available on the desired location.

3. The boot can sealing:
1). Start the motor, pot cover the lid will be packed material.
2). Put the pot on the lower die can sealing machine, and put the jar the centralizer .
3). Confirm the jar placement is correct, lid after good and correct some stepping on foot switch can sealing.
4). Stop Press the power button

4.Routine maintenance:
1. Wipe the surface: the equipment surface to wipe clean, shall not put the material.
2. Equipment fasteners: each firmware check the fastening device, lubrication.
3. The best roller shaving once a day.

Noticed
1. When move can sealing machine, must have three or more persons in below can be carried out to ensure safety.
2. Pulling and extruding the power cord is strictly prohibited.
3. The body it is forbidden to use water to rinse (can use wet cloth to wipe test only).
4. It is strictly prohibited to knock gland to touch.
5. The normal production, not control by hand wheel, etc.





 contact us
For more details, please email

sales@cnbespacker.com

Or leave a message to us
Message
Related Products
More